A Water heater is one of the most important heating devices in every household. It provides many years of trouble free-service, as long as they are maintained regularly and properly. However, water heaters can act up and leak due to wear and tear. When this happens, inspect the source of the leak to know what needs to be done. You can always ask help from a specialist if you don’t feel comfortable fixing the unit on your own.
To avoid unnecessary disasters, turn off the heating source of your water heater before inspecting it. Water and electricity are never a good mix, take safety precautions to avoid putting your life on the line. Stop water from entering the tank by turning off the cold water valve. If your gas connections are leaking, contact a specialist immediately.
Check your T&P valve for possible signs of leaks. This safety valve is designed to release excessive pressure inside the tank. Minimize the valve from opening frequently by changing the thermostat settings to a lower temperature.
Observe the water flow from the relief valve by lifting the lever and allowing it to snap back on its own. Water should stop draining as soon as the handle is released. If not, you may have a faulty relief valve. Replace the T&P valve as soon as possible to protect your tank from overheating or blowing up.
If your pipes are leaking, it is safe to assume that the pipes are loosely connected. Simply use a wrench to tighten the fittings or replace them once they are badly damaged. Look for rust stains around the pipes to recognize signs of leaks. Not taking immediate action can affect other parts of your unit. Experts recommend using a Teflon tape around the threading to stop water from leaking.
To remove the sediments inside the tank, it helps draining and flushing the tank regularly. However, this will be of no use if the sediments keep on developing inside the tank. Check the anode rod regularly and keep it in good condition since this sacrificial rod is responsible for absorbing all charged water molecules inside. Replace it once it measures less than of an inch.
If you see signs of moisture right below the unit, it is possible that your internal tank is leaking. At this point, you are left with no choice but to buy a replacement unit. Patching water heater holes won’t solve the problem since this will only lessen your unit’s efficiency.
Once the problem gets out of hand, do not hesitate to ask help from a specialist. Attempting to fix it on your own can only damage the unit further. Avoid water heater leaks by performing regular maintenance on a semi-annual basis. Doing this not only sustains your water heater’s efficiency but keeps it in good condition at the same time.
Looking to find out more about water heater replacement , then visit www.waterheaterrepairwestjordanut.com to find the best water heater specialists for your needs.
Home & Family, hot water heater repair, water heater leaking, water heater maintenance, water heater repair, water heater repair tips, water heater replacement, water heater specialist
Aucun commentaire:
Enregistrer un commentaire